Move cursor over image to zoom.
Click on image to zoom.
Pump DSH-P
New productItem #2124505
Self-priming pump – used with a dust suppression system when wet cutting with gas saws
- Accessory type: Pumps
- Product information: DSH-P technical dataWeight: 1,27kg (2.8lb)Dimensions: Pump overall: Ø=113mm (4.4’’) Pump body: Ø= 76mm (3.0’’) Height: H= 129mm (5.1’’)Max. suction lift: 1,5m (5 ft) with 3.0m (10ft) hoseMax. supply pressure: 6 bar (87 PSI)Hose length: 3,0m (10 ft)Max. hose length: 9.0m (30 ft) up to 1.5m suction liftTightening torque: 8.0 NmConsumption: 1.0 ltr/min (0.264 gallon/min)
Features & Applications
Features & Applications
Pump DSH-P #2124505
Features
- Provides independence from a pressurized water source
- No assistant required to suppress dust while cutting with gas saws when you have no access to a pressurized water source
- Can be quickly and easily attached or detached from the DSH-P (only 3 screws)
- Fits all Hilti X-version gas saws
Applications
- Laying paving: Cutting curbstones and paving slabs to size
- Road construction: Perimeter cutting in asphalt and concrete
- Floor construction: Cutting expansion joints in fresh concrete
- Construction work: Cutting out openings in brick or concrete walls
- Masonry work: Cutting bricks and blocks to size